"Money Bag" Candles
Unknown Manufacturer
The decorations on the candle can ignite, posing a fire hazard. Also, excessive pooling of wax from the burning candles poses a burn hazard.
🏠 Consumer Products • 2,430 recalls
Unknown Manufacturer
The decorations on the candle can ignite, posing a fire hazard. Also, excessive pooling of wax from the burning candles poses a burn hazard.
Oceanic, of San Leandro, Calif.
When using the dive computer set for "User Selected Digital Gauge Mode," the "Elapsed Dive Time" displayed can exceed the actual elapsed time under water. This can cause divers to ascend before fulfilling a decompression obligation, resulting in decompression sickness.
Unknown Manufacturer
The cushion lever mounting bracket on the ATV frame can break. If this occurs, the rider could lose control of the ATV and crash, posing a risk of serious injury or death.
Unknown Manufacturer
These rockets are overloaded with flash powder, violating the regulatory standard for this product. During use, these fireworks could explode with a greater force than expected and cause burns and bodily harm to nearby consumers.
Unknown Manufacturer
The sandals' metal tacks, which help to hold down the sides of the strap to the sole, can detach or be pulled out, posing a laceration hazard.
Robert Bosch Tool Corp., Mt. Prospect, Ill.
The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury. "! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped."
Robert Bosch Tool Corp., Mt. Prospect, Ill.
The drill bit packages are not properly labeled with precautionary information on proper use and operation. These and other manufacturers' 13-inch bits can bend when run at a high speed without being in contact with a work surface, resulting in loss of control of the drill and possible lacerations. The safety label should read: "! WARNING Read, understand and comply with tool manual before use. Wear eye protection. Max operating speed 600 RPM. At higher speeds the bit is likely to bend if allowed to rotate freely without contacting the work. Start drilling at low RPM and with bit tip in contact with work. To avoid bit bowing - Apply pressure only in direct line with bit and do not apply excessive pressure. Bits can bind, causing breakage or loss of control. Do not use in hammer drills or in drill press."
Atlas Industrial S.A. of San José, Costa Rica
These ranges lack an adequate heat shield, and can cause scorching of certain flooring materials directly under the appliance.
Joong Chen Industries, of Taiwan
The treadmill can unexpectedly accelerate or decelerate, possibly causing the user to lose control and fall.
Scubapro® with global headquarters located in El Cajon, Calif.
A manufacturing error could cause the main housing of some regulators to change shape over time, which could cause the cover and diaphragm to become dislodged. If this occurs, air flow will be interrupted and the regulators will no longer function, posing a drowning hazard to users.
Unknown Manufacturer
The coffeemaker may not turn off as programmed, causing the unit to overheat and melt, and posing a risk of fire and burn injury.
Unknown Manufacturer
The digital camera can cause certain non-rechargeable batteries, such as the Duracell CP-1, to overheat when the camera is connected to an AC adapter or docking station, posing a fire hazard.
Unknown Manufacturer
The lights attached to the ficus tree have undersized and exposed wires, which pose a risk of electric shock and fire hazards.
Masterbuilt Manufacturing Inc., of Columbus Ga.
Smoldering wood chips used in the wood chip box can ignite into flames when the door of the unit is opened, posing a risk of burn injuries to users and property damage to nearby combustibles.
Unknown Manufacturer
Exposed wires inside the mirror could pose an electrical shock hazard to the user, when they touch the mirror.
Arctic Cat Inc., of Thief River Falls, Minn.
The rear brake caliper used on these units could leak brake fluid, resulting in reduced braking ability at the rear wheels. The front wheel brakes are unaffected by this condition.
Solectron (Suzhou) Technology Co. Ltd., of Suzhou, China
Sensors in these fire detection systems could experience reduced sensitivity to smoke in conditions of high humidity and high temperature. If this occurs, these sensors could delay detecting the presence of smoke in the event of a fire.
Solectron (Suzhou) Technology Co. Ltd., of Suzhou, China
The smoke detectors could experience reduced sensitivity to smoke in conditions of high humidity and high temperature. If this occurs, these detectors could delay detecting the presence of smoke in the event of a fire.
Primal Vantage Company Inc., of Randolph, N.J.
The j-hook attachment of the tree strap can fail, which can cause the tree stand to collapse. Consumers using these stands could fall and suffer serious injuries or death.
Unknown Manufacturer
Defective bolts could cause the swing set frame to detach from the fort structure, posing a fall hazard to the user.