The burner plate and flue hood seal on the water heaters can fail due to an improper seal causing a leak of flue gases and carbon monoxide (CO). This poses the risk of CO poisoning to consumers inside of the house.
Olympus Imaging America Inc., of Center Valley, Pa.
Class II - Moderate
A defect with the flash circuit in these cameras can cause it to smoke and overheat, when the camera is turned on. This poses a possible burn hazard to consumers.
When partially filled with water, the pool toy can stand upright on the pool floor with the rigid narrow end pointed upward, posing an impalement risk.
A problem in the manufacturing process could cause damage to the circuit in the interlock module. If the interlock module fails, the mower blades will be able to run with no operator on the tractor seat. Consumers could suffer injuries from contact with operating blades.
The plastic body of the lawn sprinkler can crack when placed under intense water pressure and pieces of it can break off and be projected 5 to 10 feet in the air. This could pose a risk of injury to consumers and bystanders.
When the lawnmower is operated, the replacement blade can crack and pieces can break away, posing a serious laceration hazard to consumers and bystanders.
A mechanical part on these pumps was not fully tightened, which can lead to the pump failing during use. If pumps sold with fire suppression systems fail, the risk of fire damage increases. The pump itself does not pose a fire hazard.
5-gallon plastic pails containing the cleaning products can unexpectedly crack and leak from the base, posing a risk to consumers, due to the corrosive nature of these products.
The paint on the bendable toys contains excessive levels of lead, which is banned under federal law. Lead is toxic and, if ingested by young children, can cause adverse health effects.