Household items, electronics, toys, and furniture
Sunrise Medical of Heidelberg, Germany
There is a small risk that the quick release axles of the rear wheels do not lock correctly. If the quick release axle is not fully and properly engaged, the wheel could become detached while moving. A detached wheel could result in loss of control of the cycle and potential for serious injury or death, due to a fall or collision with another object.
Unknown Manufacturer
The circuit board in the lamps can overheat and melt the plastic housing, posing a fire or thermal burn hazard to consumers.
Unknown Manufacturer
Flames from the tea-light candle can ignite the candleholder, posing a fire hazard and risk of burn injuries to consumers.
API Outdoors, of Tallulah, La., a division of Outland Sports Inc., of Overland Park, Kan.
A cable that secures the treestand to the tree can break, posing the risk of falls and serious injuries to hunters.
Unknown Manufacturer
Air baths release heated bubbles into the water. A heating element on these baths can fail to shut off, posing a fire hazard.
Suzuki Motor Corporation of Brea, Calif.
Some of the ATVs were assembled with a wire harness that may have broken ground wire strands from an improperly crimped wire splice. Broken ground wire strands could result in electrical open circuits. An electrical open circuit could prevent the tail/stop lamp from illuminating or could cause the CDI-unit of the ignition to not function. If the CDI-unit does not function, the engine will stop running, possibly leaving the rider stranded away from his or her base of operation.
Unknown Manufacturer
The frames on some of these bicycles have been improperly manufactured, causing too much of the thickest portion of the downtube to be removed. This could cause the frame to break during use, resulting in falls and serious injury to riders.
Unknown Manufacturer
The printers can overheat, posing a fire hazard to consumers.
Fanimation Design and Manufacturing Inc., of Lebanon, Ind.
The hanger bracket can break, which could cause the fan to fall from the ceiling and seriously injure anyone standing nearby.
Unknown Manufacturer
The plastic beads inside of the bears could come out of the seams, posing an aspiration hazard to young children, who could inhale the small beads.
Lida Bicycle Co. Ltd., of China
The frames of these bicycles can break apart, causing the rider to fall and suffer injuries.
Unknown Manufacturer
If a consumer inadvertently releases the spring-loaded staple magazine while holding the stapler close to his/her face, there is a risk of injury from a fully loaded magazine striking a consumer in the face.
Unknown Manufacturer
Internal wiring can abrade on metal parts, presenting a risk of electric shock to consumers if the insulation wears through.
Unknown Manufacturer
There have been reports that some tea-light candles burning in the candleholder could flare up, posing a fire hazard and a risk of burn injuries to consumers.
Snapper, Inc., of McDonough, Ga.
The side discharge chute is defective. The material used to manufacture the side discharge chute is not strong enough to prevent projectiles from flying out from under the mower deck, exposing consumers and by-standers to possible injuries from flying debris.
Unknown Manufacturer
The flame of a candle placed inside the Jack-O-Lantern could ignite the straw ribbon on the outside, posing fire and burn hazards to consumers.
BSH Home Appliances Corp., of Huntington Beach, Calif.
The cooking controls are miswired, which can pose a shock hazard to consumers.
Unknown Manufacturer
The antenna on the pull toy can detach, posing a choking hazard to young children.
Unknown Manufacturer
The seams can separate, exposing the polyester stuffing and foam beads. The foam beads pose a choking hazard to young children.
Unknown Manufacturer
The eyes on the toys can detach, posing a choking hazard to young children.