U.S. Boiler, New Yorker Boiler, Advantage, FORCE and Archer brand gas-fired hot water residential boilers
Class II - ModerateWhat Should You Do?
- Check if you have this product: (About 2,500)
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
Recall Details
- Company:
- U.S. Boiler Company LLC, of Lancaster, Pennsylvania
- Reason for Recall:
- The blocked vent switch (BVS) can fail to shut down the burners if the boilers are installed at altitudes above 5,400 feet and the vent system becomes blocked. In such an event, the boiler can emit excessive amounts of carbon monoxide into the home, posing a carbon monoxide (CO) poisoning hazard to consumers.
- Classification:
- Class II - Moderate
Products that might cause a temporary health problem, or pose a slight threat of a serious nature.
- Status:
- ongoing
- Hazard:
- The blocked vent switch (BVS) can fail to shut down the burners if the boilers are installed at altitudes above 5,400 feet and the vent system becomes blocked. In such an event, the boiler can emit excessive amounts of carbon monoxide into the home, posing a carbon monoxide (CO) poisoning hazard to consumers.
- Remedy:
- Consumers with the recalled boilers should immediately contact U.S. Boiler to receive a free repair that includes a free replacement main burner gas orifice and a free replacement blocked vent switch if needed. Consumers who continue use of the boilers while awaiting repair should have working carbon monoxide alarms outside of sleeping areas and on each floor of the home.
Product Images
Product Information
Full Description:
This recall involves gas-fired residential boilers with brand names U.S. Boiler, New Yorker Boiler, Advantage, FORCE and Archer. The following boiler models that are currently installed at altitudes greater than 5,400 ft. above sea level are part of this recall. The U.S. boiler ES2 and Series 3 models are blue with a black top front and black vents on the front. The logo is located on the black top front of the boiler. The X-2 model has a solid teal color. The logo is located in the front middle of the boiler. The Lancer model is gray with a blue top. The logo is located in the front middle of the boiler. The Force G-3 model is solid gray. The logo is located in the front middle of the boiler. The CGE and CGF models are solid green The logo is located in the front middle of the boiler. The model and serial numbers are located on the boiler rating plate, which is on the top panel of the ES2 and Series 3 models, and on the inside vestibule (behind removable door) on the right side panel for X-2, CG-F, CG-E, AG , Force and Archer models. All of the models are about 40 inches tall from the floor to the top of the jacket. U.S. Boiler ES2 models ES23, ES24, ES25, ES26, ES27, ES28, ES29 (with or without "-N" or "-P" suffix) U.S. Boiler Series 3 models 303, 304, 305, 306, 307, 308, 309 (with or without "-N" or "-P" suffix) U.S. Boiler X-2 models X-202, X-203, X-204, X-205, X-206, X-207, X-208, X-209 New Yorker CG-E models CG30E, CG40E, CG50E, CG60E, CG70E, CG80E, CG90E New Yorker CG-F models CG20F, CG30F, CG40F, CG50F, CG60F, CG70F, CG80F, CG90F Advantage AG models AG3, AG4, AG5, AG6 FORCE models FORCE02E, FORCE03E, FORCE04E, FORCE05E, FORCE06E, FORCE07E, FORCE08E, FORCE09E Archer Boilers Lancer models LCR-2-038, LCR-3-068, LCR-4-102, LCR-5-136, LCR-6-170
Product Codes/Lot Numbers:
(About 2,500)
Official Source
Always verify recall information with the official CPSC source:
View on CPSC.govCPSC Recall Number: 24161