Philips IntelliVue Information Center/Client and Philips IntelliVue Information Center iX The intended use of the Information Center Software is to display physiologic waves, parameters, and trends, format data for strip chart recordings and printed reports, and provide the secondary annunciation of alarms from other networked medical devices at a centralized location. The Information Center Software provides for the retrospective review of alarms, physiologic waves and parameters from its database. An additional intended use of the Information Center Software is to provide primary annunciation of alarms and configuration and control access for networked telemetry monitors.
Class I - DangerousWhat Should You Do?
- Check if you have this product: PIIC 865435 M3140 Information Center Low Acuity 865436 M3150 Information Center Local DB 865417 M3145 Information Center Small NW DB 865418 M3155 Information Center NW DB 865415 M3151 Information Center Client 865421 M3170 Patient Link 865416 M3177 Trend Display 865422 M3140 Upgrade 865423 M3150 Upgrade 865426 M3145 Upgrade 865427 M3155 Upgrade 865424 M3151 Upgrade 865266 - M3140 Information Center Low Acuity 865267 M3150 Information Center Local DB 865269 M3145 Information Center Small NW DB 865268 M3155 Information Center NW DB 865270 M3151 Information Center Client 865274 M3170 Patient Link 865271 M3177 Trend Display 865277 M3140 Upgrade 865278 M3150 Upgrade 865281 M3145 Upgrade 865282 M3155 Upgrade 865279 M3151 Upgrade PIIC iX 866023 IntelliVue Info Center iX 866117 PIIC Classic Upgrade 866027 PIIC iX HW Upgrade
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.
Recall Details
- Company:
- Philips Healthcare Inc.
- Reason for Recall:
- Internal audio cable may have diminished retention force due to damaged contacts, which could lead to intermittent or loss of audible alarms.
- Classification:
- Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
- Status:
- ongoing
Product Information
Full Description:
Philips IntelliVue Information Center/Client and Philips IntelliVue Information Center iX The intended use of the Information Center Software is to display physiologic waves, parameters, and trends, format data for strip chart recordings and printed reports, and provide the secondary annunciation of alarms from other networked medical devices at a centralized location. The Information Center Software provides for the retrospective review of alarms, physiologic waves and parameters from its database. An additional intended use of the Information Center Software is to provide primary annunciation of alarms and configuration and control access for networked telemetry monitors.
Product Codes/Lot Numbers:
PIIC 865435 M3140 Information Center Low Acuity 865436 M3150 Information Center Local DB 865417 M3145 Information Center Small NW DB 865418 M3155 Information Center NW DB 865415 M3151 Information Center Client 865421 M3170 Patient Link 865416 M3177 Trend Display 865422 M3140 Upgrade 865423 M3150 Upgrade 865426 M3145 Upgrade 865427 M3155 Upgrade 865424 M3151 Upgrade 865266 - M3140 Information Center Low Acuity 865267 M3150 Information Center Local DB 865269 M3145 Information Center Small NW DB 865268 M3155 Information Center NW DB 865270 M3151 Information Center Client 865274 M3170 Patient Link 865271 M3177 Trend Display 865277 M3140 Upgrade 865278 M3150 Upgrade 865281 M3145 Upgrade 865282 M3155 Upgrade 865279 M3151 Upgrade PIIC iX 866023 IntelliVue Info Center iX 866117 PIIC Classic Upgrade 866027 PIIC iX HW Upgrade
Official Source
Always verify recall information with the official FDA source:
View on FDA.govFDA Recall Number: Z-0495-2013
Related Recalls
Incisive CT, software version 5.0
Philips Healthcare
Philips has identified three software issues with compliance concerns to Subchapter J: Issue 1: Coronary Computed Tomography Angiography (CTA) scan may not be triggered at the optimal time. Issue 2: Use of aborted surview for scan planning will result in deviation from intended scan area. Issue 3: Actual clinical scan with bariatric (Noah) couch will deviate from the intended scan area if surview scan length is greater than 1832mm.
Philips StentBoost Live R2.0 application, when used with the Philips Azurion with software release R2.x
Philips Healthcare
Due to an incorrect configuration setting in the EPX database of StentBoost Live, acquisition does not stop automatically as it should. When the user selects the StentBoost Live protocol on the Philips Azurion system, the following on-screen message is displayed to the user in the Philips StentBoost Live application: "Press the cine pedal until the acquisition stops". However, due to the incorrect configuration of the EPX database, the acquisition does not stop after 40 images, but instead it continues as long as the pedal is pressed.
Azurion systems with software release R2.0.x
Philips Healthcare
In the Azurion system, the user can add a new study to a patient by selecting the option "Add Study". The Add Study dialogue box is then displayed where the Patient Type is selected to perform the study. Due to a software defect, when the study is initiated by pressing Start Procedure , the Patient Type changes inadvertently to a Patient Type different than the one selected as shown in the Table below. Patient type is one of the factors involved in the dose control process. The incorrect patient type changes the technique factors to be used by the system without notification to the user.