Philips IntelliVue TcG10; Monitor, carbon-dioxide, cutaneous. The IntelliVue TcG10 is a device for the measurement of the transcutaneous O2 and CO2 partial pressure in neonates, pediatrics and adults.
Class I - DangerousWhat Should You Do?
- Check if you have this product: Serial Numbers: CH03800507 CH03800508 CH03800509 CH03800510 CH03800559 CH03800560 CH03800573 CH03800574 CH03800575 CH03800576 CH03800577 CH03800578 CH03800579 CH03800580 CH03800633 CH03800634 CH03800637 CH03800638 CH03800642 CH03800676 CH03800678 CH03800685 CH03800687 CH03800688 CH03800690 CH03800692 CH03800693 CH03800694 CH03800695 CH03800696 CH03800697 UK21001105 UK21001111 UK21001123 UK21001134 UK21001144 UK21001154 UK21001162 UK21001164 UK21001166 UK21001185 UK21001188 UK21001189 UK21001194 UK21001212 UK21001213 UK21001215 UK21001216 UK21001230 UK21001237 UK21001245 UK21001247 UK21001257 UK21001287 UK21001294 UK21001298 UK21001299 UK21001313 UK21001318 UK21001319 UK21001332 UK21001348 UK21001363 UK21001366 UK21001371 UK21001384 UK21001386 UK21001399 UK21001401 UK21001405 UK21001425 UK21001436 UK21001437 UK21001461 UK21001468 UK21001469 UK21001479 UK21001480 UK21001556 UK21001557 UK21001577 UK21001579 UK21001662 UK21001770 UK21001841 UK21001979
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.
Recall Details
- Company:
- Philips Medical Systems, Inc.
- Reason for Recall:
- Philips has discovered that the Instructions for Use (IFU) for the IntelliVue TcG10 Transcutaneous Gas Measurement Module is missing the contraindication that the device is not to be used on patients under gas anesthesia.
- Classification:
- Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
- Status:
- terminated
Product Information
Full Description:
Philips IntelliVue TcG10; Monitor, carbon-dioxide, cutaneous. The IntelliVue TcG10 is a device for the measurement of the transcutaneous O2 and CO2 partial pressure in neonates, pediatrics and adults.
Product Codes/Lot Numbers:
Serial Numbers: CH03800507 CH03800508 CH03800509 CH03800510 CH03800559 CH03800560 CH03800573 CH03800574 CH03800575 CH03800576 CH03800577 CH03800578 CH03800579 CH03800580 CH03800633 CH03800634 CH03800637 CH03800638 CH03800642 CH03800676 CH03800678 CH03800685 CH03800687 CH03800688 CH03800690 CH03800692 CH03800693 CH03800694 CH03800695 CH03800696 CH03800697 UK21001105 UK21001111 UK21001123 UK21001134 UK21001144 UK21001154 UK21001162 UK21001164 UK21001166 UK21001185 UK21001188 UK21001189 UK21001194 UK21001212 UK21001213 UK21001215 UK21001216 UK21001230 UK21001237 UK21001245 UK21001247 UK21001257 UK21001287 UK21001294 UK21001298 UK21001299 UK21001313 UK21001318 UK21001319 UK21001332 UK21001348 UK21001363 UK21001366 UK21001371 UK21001384 UK21001386 UK21001399 UK21001401 UK21001405 UK21001425 UK21001436 UK21001437 UK21001461 UK21001468 UK21001469 UK21001479 UK21001480 UK21001556 UK21001557 UK21001577 UK21001579 UK21001662 UK21001770 UK21001841 UK21001979
Distribution:
Distributed in: CA, HI, IL, MA, MI, MO, MT, NC, OH, PA
Official Source
Always verify recall information with the official FDA source:
View on FDA.govFDA Recall Number: Z-0997-2015
Related Recalls
Model: Incisive CT for Brazil SKD; Product Code (REF): 728146; Software Versions: 5.1.0.X & 5.1.1.X;
PHILIPS MEDICAL SYSTEMS
Issue 1: The potential for unintentional continued gantry/couch movement when a specific button series is used requiring use of manual stop. Issue 2. When performing a helical/Axial scan with ORI (Dose Right index)/ DOM (Dose Modulation), the WED (Water Equivalent Diameter) value might set itself to zero, and this may lead to an insufficient dose setting after the surview. If operator misses the insufficient dose and the WED value in User Interface and continues with the subsequent helical/Axial scans, then the obtained images will be noisy due to low dose setting. Issue 3: Due to a software failure, the ECG wave file is not saved. As a result, the cardiac offline image reconstruction fails due to the missing ECG wave file, and the user might rescan the patient. Issue 4: This issue is software fault in which the patient orientation will be changed to NULL under specific random scenarios resulting in radiation being delivered from the wrong orientation (surview scan) or in the wrong position (clinical scan) and will generate incorrect and undiagnosable surview/clinical images. Patients may be rescanned for surview and/or clinical images. Issue 5: During scanning, the preview image display is not consistent, the images are not arriving at a fixed rate, skipping images from time to time during scanning. The obtained images might not support making the clinical diagnosis and the user might decide to re-scan the patient. Issue 6: If a user presses the left and middle/right mouse buttons together or afterwards in a short time, both commands are executed and an incorrect auto ROI is created. This ROI coordinates won t be assigned as the object is empty. As a result, the threshold of contrast level will not be reached in the UI and this will prevent the system from automatically triggering the subsequent clinical scan. There is potential safety risk identified for additionally tracker shots and/or rescan of a patient when the clinical scan is not triggered. This issue only affects the manual ROI process.
Model: CT 5300; Product Code (REF): 728285; Software Versions: 5.1.0.X & 5.1.1.X;
PHILIPS MEDICAL SYSTEMS
Issue 1: The potential for unintentional continued gantry/couch movement when a specific button series is used requiring use of manual stop. Issue 2. When performing a helical/Axial scan with ORI (Dose Right index)/ DOM (Dose Modulation), the WED (Water Equivalent Diameter) value might set itself to zero, and this may lead to an insufficient dose setting after the surview. If operator misses the insufficient dose and the WED value in User Interface and continues with the subsequent helical/Axial scans, then the obtained images will be noisy due to low dose setting. Issue 3: Due to a software failure, the ECG wave file is not saved. As a result, the cardiac offline image reconstruction fails due to the missing ECG wave file, and the user might rescan the patient. Issue 4: This issue is software fault in which the patient orientation will be changed to NULL under specific random scenarios resulting in radiation being delivered from the wrong orientation (surview scan) or in the wrong position (clinical scan) and will generate incorrect and undiagnosable surview/clinical images. Patients may be rescanned for surview and/or clinical images. Issue 5: During scanning, the preview image display is not consistent, the images are not arriving at a fixed rate, skipping images from time to time during scanning. The obtained images might not support making the clinical diagnosis and the user might decide to re-scan the patient. Issue 6: If a user presses the left and middle/right mouse buttons together or afterwards in a short time, both commands are executed and an incorrect auto ROI is created. This ROI coordinates won t be assigned as the object is empty. As a result, the threshold of contrast level will not be reached in the UI and this will prevent the system from automatically triggering the subsequent clinical scan. There is potential safety risk identified for additionally tracker shots and/or rescan of a patient when the clinical scan is not triggered. This issue only affects the manual ROI process.
Model: Incisive CT; Product Code (REF): (1) 728143, (2) 728144; Software Versions: 5.1.0.X & 5.1.1.X;
PHILIPS MEDICAL SYSTEMS
Issue 1: The potential for unintentional continued gantry/couch movement when a specific button series is used requiring use of manual stop. Issue 2. When performing a helical/Axial scan with ORI (Dose Right index)/ DOM (Dose Modulation), the WED (Water Equivalent Diameter) value might set itself to zero, and this may lead to an insufficient dose setting after the surview. If operator misses the insufficient dose and the WED value in User Interface and continues with the subsequent helical/Axial scans, then the obtained images will be noisy due to low dose setting. Issue 3: Due to a software failure, the ECG wave file is not saved. As a result, the cardiac offline image reconstruction fails due to the missing ECG wave file, and the user might rescan the patient. Issue 4: This issue is software fault in which the patient orientation will be changed to NULL under specific random scenarios resulting in radiation being delivered from the wrong orientation (surview scan) or in the wrong position (clinical scan) and will generate incorrect and undiagnosable surview/clinical images. Patients may be rescanned for surview and/or clinical images. Issue 5: During scanning, the preview image display is not consistent, the images are not arriving at a fixed rate, skipping images from time to time during scanning. The obtained images might not support making the clinical diagnosis and the user might decide to re-scan the patient. Issue 6: If a user presses the left and middle/right mouse buttons together or afterwards in a short time, both commands are executed and an incorrect auto ROI is created. This ROI coordinates won t be assigned as the object is empty. As a result, the threshold of contrast level will not be reached in the UI and this will prevent the system from automatically triggering the subsequent clinical scan. There is potential safety risk identified for additionally tracker shots and/or rescan of a patient when the clinical scan is not triggered. This issue only affects the manual ROI process.