Philips Digital Diagnost-Mobile Detector Holder for Digital Diagnost (Single Detector, Dual Detector, Release 3) System codes: 712020, 712022, 712025 This system is used for making X-ray exposures for diagnostics.
Class I - DangerousWhat Should You Do?
- Check if you have this product: Serial Numbers: SN10000053 SN11000644 SN10000648 SN10000649 SN11000226 SN10000703 SN11000032 SN10000407 SN11000105 SN11000112 SN11000212 SN11000231 SN11000030 SN10000468 SN11000146 SN11000217 SN11000238 SN11000407 SN11000154 SN10000297 SN10000515 SN11000129 SN11000266 SN11000412 SN11000442 SN11000063 SN11000441 SN10000416 SN10000414 SN10000424 SN11000034 SN10000018 SN11000050 SN10000113 SN10000442 SN11000057 SN11000419 SN10000482 SN10000670 SN10000690 SN10000689 SN10000694 SN11000461 SN10000544 SN11000095 SN11000329 SN11000464 SN10000554 SN10000635 SN10000107 SN10000413 SN10000557 SN11000092 SN11000100 SN11000118 SN11000145 SN11000161 SN11000193 SN11000194 SN11000228 SN11000294 SN11000371 SN10000038 SN10000101 SN10000102 SN10000641 SN10000664 SN11000027 SN10000537 SN10000650 SN11000130 SN11000142 SN11000216 SN11000269 SN11000286 SN11000288 SN11000311 SN11000320 SN10000363 SN10000246 SN10000512 SN11000033 SN11000053 SN11000080 SN11000271 SN11000478 SN11000474 SN11000013 SN11000005 SN11000008 SN11000004 SN11000141 SN11000007
- Do not eat it: Even if it looks and smells fine, do not consume this product.
- Throw it away or return it: You can return the product to the store for a full refund.
- Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
- Report problems: Report any issues to the FDA's Safety Reporting Portal.
⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.
Recall Details
- Company:
- Philips Healthcare Inc.
- Reason for Recall:
- The Wireless Portable Detector (WPD) is not fixed securely inside the Mobile Detector Holder and may fall down
- Classification:
- Class I - Dangerous
Dangerous or defective products that predictably could cause serious health problems or death.
- Status:
- terminated
Product Information
Full Description:
Philips Digital Diagnost-Mobile Detector Holder for Digital Diagnost (Single Detector, Dual Detector, Release 3) System codes: 712020, 712022, 712025 This system is used for making X-ray exposures for diagnostics.
Product Codes/Lot Numbers:
Serial Numbers: SN10000053 SN11000644 SN10000648 SN10000649 SN11000226 SN10000703 SN11000032 SN10000407 SN11000105 SN11000112 SN11000212 SN11000231 SN11000030 SN10000468 SN11000146 SN11000217 SN11000238 SN11000407 SN11000154 SN10000297 SN10000515 SN11000129 SN11000266 SN11000412 SN11000442 SN11000063 SN11000441 SN10000416 SN10000414 SN10000424 SN11000034 SN10000018 SN11000050 SN10000113 SN10000442 SN11000057 SN11000419 SN10000482 SN10000670 SN10000690 SN10000689 SN10000694 SN11000461 SN10000544 SN11000095 SN11000329 SN11000464 SN10000554 SN10000635 SN10000107 SN10000413 SN10000557 SN11000092 SN11000100 SN11000118 SN11000145 SN11000161 SN11000193 SN11000194 SN11000228 SN11000294 SN11000371 SN10000038 SN10000101 SN10000102 SN10000641 SN10000664 SN11000027 SN10000537 SN10000650 SN11000130 SN11000142 SN11000216 SN11000269 SN11000286 SN11000288 SN11000311 SN11000320 SN10000363 SN10000246 SN10000512 SN11000033 SN11000053 SN11000080 SN11000271 SN11000478 SN11000474 SN11000013 SN11000005 SN11000008 SN11000004 SN11000141 SN11000007
Official Source
Always verify recall information with the official FDA source:
View on FDA.govFDA Recall Number: Z-2465-2012
Related Recalls
Incisive CT, software version 5.0
Philips Healthcare
Philips has identified three software issues with compliance concerns to Subchapter J: Issue 1: Coronary Computed Tomography Angiography (CTA) scan may not be triggered at the optimal time. Issue 2: Use of aborted surview for scan planning will result in deviation from intended scan area. Issue 3: Actual clinical scan with bariatric (Noah) couch will deviate from the intended scan area if surview scan length is greater than 1832mm.
Philips StentBoost Live R2.0 application, when used with the Philips Azurion with software release R2.x
Philips Healthcare
Due to an incorrect configuration setting in the EPX database of StentBoost Live, acquisition does not stop automatically as it should. When the user selects the StentBoost Live protocol on the Philips Azurion system, the following on-screen message is displayed to the user in the Philips StentBoost Live application: "Press the cine pedal until the acquisition stops". However, due to the incorrect configuration of the EPX database, the acquisition does not stop after 40 images, but instead it continues as long as the pedal is pressed.
Azurion systems with software release R2.0.x
Philips Healthcare
In the Azurion system, the user can add a new study to a patient by selecting the option "Add Study". The Add Study dialogue box is then displayed where the Patient Type is selected to perform the study. Due to a software defect, when the study is initiated by pressing Start Procedure , the Patient Type changes inadvertently to a Patient Type different than the one selected as shown in the Table below. Patient type is one of the factors involved in the dose control process. The incorrect patient type changes the technique factors to be used by the system without notification to the user.