🔍 RecallPedia

BD Alaris System. The EtCO2 module is a capnograph indicated for continuous, noninvasive monitoring of end tidal carbon dioxide (EtCO2), fractional inspired carbon dioxide (FiCO2) and respiratory rate (RR). The EtCO2 module and disposables are indicated for use with intubated and nonintubated adult, pediatric and neonatal patients. It is not intended for direct connection to ventilator or breathing systems. Only one EtCO2 module can be connected to the Alaris System.

Class I - Dangerous
🏥 Medical Devices Recalled: August 4, 2020 CareFusion 303 Diagnostic Equipment Nationwide

What Should You Do?

  1. Check if you have this product:
    Model: EtCO2 8300; Lot/Serial numbers: 10002682711, 10002720508, 1000287042, 10002882569
  2. Do not eat it: Even if it looks and smells fine, do not consume this product.
  3. Throw it away or return it: You can return the product to the store for a full refund.
  4. Seek medical attention if needed: If you've consumed this product and feel unwell, contact your doctor immediately.
  5. Report problems: Report any issues to the FDA's Safety Reporting Portal.

⚠️ Emergency: If you experience severe symptoms after consuming this product, call 911 or Poison Control at 1-800-222-1222.

Recall Details

Company:
CareFusion 303, Inc.
Reason for Recall:
Infusion pump component defect may result in interruption of patient monitoring
Classification:
Class I - Dangerous

Dangerous or defective products that predictably could cause serious health problems or death.

Status:
ongoing

Product Information

Full Description:

BD Alaris System. The EtCO2 module is a capnograph indicated for continuous, noninvasive monitoring of end tidal carbon dioxide (EtCO2), fractional inspired carbon dioxide (FiCO2) and respiratory rate (RR). The EtCO2 module and disposables are indicated for use with intubated and nonintubated adult, pediatric and neonatal patients. It is not intended for direct connection to ventilator or breathing systems. Only one EtCO2 module can be connected to the Alaris System.

Product Codes/Lot Numbers:

Model: EtCO2 8300; Lot/Serial numbers: 10002682711, 10002720508, 1000287042, 10002882569

Official Source

Always verify recall information with the official FDA source:

View on FDA.gov

FDA Recall Number: Z-2935-2020

Related Recalls

BD Alaris infusion Pump Module 8100, REF: 8100; KIT, BEZEL ASSY 8100BD, REF: 49000437; KIT ASSY ONE PIECE BEZEL 8100, REF: 49000270. Used with the following new and updated documents: BD Alaris Infusion System Inspection Safety Reminder, Part: BD-163124, Revision: 00; Cleaning and Disinfecting Procedure, Part: P00000864; Cleaning and Disinfecting Quick Reference Guide

CareFusion 303

Class I - Dangerous

If infusion pump is dropped or severely jarred this may damage the pump module bezel assembly, which can cause under-infusion, over-infusion, unregulated flow, or pump module failure to calibrate; so dropped/jarred pumps should be removed from use, tested, and inspected by qualified service personnel prior to reuse; tip sheet, cleaning and disinfecting procedure and reference guide updated.

Oct 17, 2025 Infusion Pumps Nationwide View Details →

Various models of BD Pyxis MedFlex, Reference numbers: 1119-00 1139-00 139038-01 139039-01 139040-01 139041-01 139043-01 139044-01 139045-01 139046-01 139049-01 139051-01 139052-01 139053-01 139054-01 139055-01 139056-01 139058-01 139059-01 139060-01 139061-01 139064-01 139065-01 139066-01 139067-01 139068-01 139069-01 139070-01 139071-01 139072-01 139164-01 139165-01 300

CareFusion 303

Class I - Dangerous

Potential fluid ingress of anesthesia station or med station may result in smoke, system downtime and/or fire.

Sep 30, 2025 Other Medical Devices Nationwide View Details →