All Recalls

Lack of Processing Controls.

CGMP Deviations - Product was exposed to temperatures outside the product's labeled storage requirements.

Lack of Processing Controls.

CGMP Deviations: Presence of Nitrosamine Drug Substance Related Impurity above the proposed interim limit.

Lack of Processing Controls.

CGMP Deviations - Product was exposed to temperatures outside the product's labeled storage requirements.

Lack of Processing Controls.

Lack of Processing Controls.

Lack of Processing Controls.

Lack of Processing Controls.

CGMP Deviations - Product was exposed to temperatures outside the product's labeled storage requirements.

Lack of Processing Controls.

CGMP Deviations: Presence of Nitrosamine Drug Substance Related Impurity above the proposed interim limit.

Beckman Coulter identified that the Unsaturated Iron Binding Capacity (UIBC) assay is not meeting their labeled hemoglobin interference claims of no significant interference (i.e., less than 10%) up to 200 mg/dL hemoglobin as indicated in their instructions for use. Initial internal testing confirmed that samples with low UIBC levels failed the claimed hemolysis interference specifications with reported biases up to -43.6 % UIBC when hemolyzed serum samples contained 200 mg/dL hemoglobin.

CLEARIFY VISUALIZATION SYSTEM was inadvertently resterilized in kits, causing discoloration.

CLEARIFY VISUALIZATION SYSTEM was inadvertently resterilized in kits, causing discoloration.

Beckman Coulter has identified that the UniCel DxI 600/800 systems with linear slide PnP gantries running software versions 5.7 and up faced incorrect PnP X-motor current settings where the PnP X-motor current incorrectly resets to 1.5A (instead of the required 2.0A) because the software overwrites the factory setting during installs or upgrades. This anomaly causes increased PnP motion errors which could lead to delays in reporting patient sample results if unnoticed.

Beckman Coulter has identified that the UniCel DxI 600/800 systems with linear slide PnP gantries running software versions 5.7 and up faced incorrect PnP X-motor current settings where the PnP X-motor current incorrectly resets to 1.5A (instead of the required 2.0A) because the software overwrites the factory setting during installs or upgrades. This anomaly causes increased PnP motion errors which could lead to delays in reporting patient sample results if unnoticed.

Siemens Healthcare Diagnostics Inc. has confirmed that a negative sodium bias may exist in some epoc test card lots. All other analytes are performing as intended. The observed average bias for sodium was -4.4 mmol/L. The maximum bias observed was -14 mmol/L, which occurred at a higher sodium concentration around 150 mmol/L. No positive bias has been observed. Quality Control (QC) fluid may or may not detect the issue depending on the bias magnitude and the frequency of QC testing.

CLEARIFY VISUALIZATION SYSTEM was inadvertently resterilized in kits, causing discoloration.