All Recalls

Reagent Carryover from LDL Cholesterol Direct (DLDL), Total Protein II (TP), Triglycerides (Trig), and Triglycerides_2 (Trig_2) Impacting Magnesium (Mg) Results

Complaint of endoscope model becoming lodged in the endotracheal tube connector due to diameter being too large.

Complaint of endoscope model becoming lodged in the endotracheal tube connector due to diameter being too large.

Complaint of endoscope model becoming lodged in the endotracheal tube connector due to diameter being too large.

Due to a manufacturing issue, when using valve repair systems, intended to repair insufficient mitral and/or tricuspid valves, users experienced resistance when attempting to release the implant from the delivery system by rotating the release knob. Additional torque required to initiate rotation of the release wire from the implant, could cause implant rotation or additional implant implantation.

IFU labeling is being updated to revise EtO gas mixture and elimination of reusable cleaning brushes.

A crack in the weld of the rasp handle may lead to a fracture of the frontal sleeve when the rasp is further impacted or extracted. The rasp remains intact. The rasp would need to be pulled out by a clamp leading to a prolongation of surgery or modified surgery

Potential for reagent carryover on the Atellica CH 930 resulting in a positive bias that could impact quality control (QC), patient samples, and calibrator results with from Atellica¿ CH Total Bilirubin_2 (TBil_2), Atellica¿CH LDL Cholesterol (LDLC), Atellica¿ CH Gamma-Glutamyl Transferase (GGT) and Atellica¿CH HDL Cholesterol (HDLC)

Users were reporting that the device was not charging as expected. It was discovered that users were unaware that the Cardiosave console was not completely inserted into the hospital cart. If the console is not fully inserted back into the cart the battery(ies) will not charge.

Users were identifying autofill failure conditions on the devices causing pump stops.

Potential for current software to miscount when scanning in multiple sponge-products from the same unique sponge-pack type

Complaint of endoscope model becoming lodged in the endotracheal tube connector due to diameter being too large.

Complaint of endoscope model becoming lodged in the endotracheal tube connector due to diameter being too large.

Complaint of endoscope model becoming lodged in the endotracheal tube connector due to diameter being too large.

Recent reports of patient infection.

Awl instrument adjustable drill button assembly assembled in the incorrect orientation, preventing locking feature from engaging with shaft at the desired set point; instruments lack ability to control awl depth by means of adjustable shaft advancement stop, which may lead to over insertion, dural tear, vascular/neurologic injury, adjacent tissue damage, increased operative time, revision surgery.

Their is a potential that optical devices with insufficient anti-reflective coating may lead to incorrect axial length measurements.

Loss of availability of the wireless foot switch during procedures.

Potential for reagent carryover on the Atellica CH 930 resulting in a positive bias that could impact quality control (QC), patient samples, and calibrator results with from Atellica¿ CH Total Bilirubin_2 (TBil_2), Atellica¿ CH LDL Cholesterol (LDLC), Atellica¿ CH Gamma-Glutamyl Transferase (GGT) and Atellica¿ CH HDL Cholesterol (HDLC)

Phoroptor VRx Head may detach from the bracket that connects the Phoroptor VRx Head to an ophthalmic stand. If the Phoroptor VRx Head detaches from the bracket, it can fall onto a patient or device operator