Thread form issue of the locking holes in that the locking screws would not properly mate with the plate. The improperly mated screw may not be readily recognizable by the user since the screw may not correctly lock.
All Recalls
95,114 total recalls in our database
Azurion 7 M20. X-ray Image guided Therapy System.
PHILIPS MEDICAL SYSTEMS NEDERLAND B.V.
The bolts supporting the FlexMove Carriage may become loose and/or break, and cracks may appear in the suspension rail of the FlexMove Carriage.
Wrong versions of guides 3A and 3B (Patient Specific) were shipped prior to the re-design request
The following Pro.specta Emission Computed Tomography Systems that were manufactured with an SLD Look Ahead Optical Sensor Assembly: (a) Symbia Pro.specta Q3, Model 11364751; (b) Symbia Pro.specta X3, Model 11364752; (c) Symbia Pro.specta X7, Model 11364753.
Siemens Medical Solutions USA
During a whole-body planar scan with auto-contour, there is a possibility the short-linear drive (SLD) look-ahead sensors may trigger earlier than expected and may result in detector 1 positioning further from the patient than needed leading to a reduction in image resolution.
Always-On Tip Tracked Instruments (SPiN Drive instruments) Triple Needle Brush, 12mm L, 1.8mm OD-Intended for use in clinical interventions and for anatomical structures where computed tomography and/or endoscopic brINS-0362onchoscopy are currently used for visualizing Model: INS-5300
Olympus Corporation of the Americas
Electromagnetic (EM) sensor tracking malfunction impacts the use of navigation functionality during endobronchial procedures and prompts the system to report a coil break warning message. This could result in a potential procedural delay
Potential for the labeled sterile ultrasound gel component within packs to not meet sterility specifications.
The STATCLAVE G4 is a dynamic air removal (prevacuum) tabletop steam sterilizer intended for use by a health care provider to sterilize medical products by means of pressurized steam. It is suitable for the sterilization of dental and medical instruments that are validated to be sterilized by steam. The STATCLAVE G4 has not been designed to sterilize liquid loads, bio medical waste or materials not compatible with steam sterilization. The processing of such loads may result in incomplete sterilization and / or damage to the autoclave.
Custom Sterile and Non-Sterile Procedural Kits containing Turkuaz Ultrasound Gel. Labeled as the following: a. PROBE COVER PACK, Model Number: DYNDA1219
MEDLINE INDUSTRIES, LP - Northfield
Potential for the labeled sterile ultrasound gel component within packs to not meet sterility specifications.
Potential for the labeled sterile ultrasound gel component within packs to not meet sterility specifications.
Non-conforming product may appear in the field as inability to advance or retract the basket, or the drive wire breaking or separating from handle (with or without mechanical lithotripsy).
Custom Sterile and Non-Sterile Procedural Kits containing Turkuaz Ultrasound Gel. Labeled as the following: a. EGG RETRIEVAL PACK, Model Number: DYNJ66291B; b. FETAL SURGERY CDS-LF, Model Number: CDS840214P; c. TVT PACK SMGH-LF, Model Number: DYNJ41913C;
MEDLINE INDUSTRIES, LP - Northfield
Potential for the labeled sterile ultrasound gel component within packs to not meet sterility specifications.
Potential for the labeled sterile ultrasound gel component within packs to not meet sterility specifications.
Over-Head Ceiling Tube Support, CH-200, CH-200M, Used with RadSpeed and RadSpeed PRO, Sonial Vision safire, Versa and G4 units, FluoroSpeed 300 and X1 units
SHIMADZU CORPORATION MEDICAL SYSTEMS DIVISION
Eight fixing bolts at the base of the X-ray ceiling tube column assembly may be loose or missing so service is required to install a cable, bracket, and label behind the bracket, indicating when service is required, to eliminate the risk of the device falling.
Always-On Tip Tracked Instruments (SPiN Drive instruments) Forceps, 1.8mm OD, Serrated Cup-Intended for use in clinical interventions and for anatomical structures where computed tomography and/or endoscopic brINS-0362onchoscopy are currently used for visualizing Model: INS-0372
Olympus Corporation of the Americas
Electromagnetic (EM) sensor tracking malfunction impacts the use of navigation functionality during endobronchial procedures and prompts the system to report a coil break warning message. This could result in a potential procedural delay
Certain lots of the products have a Naphthalene odor.
Always-On Tip Tracked Instruments (SPiN DriveΒΏ instruments) Brush, 15mm L, 1.8mm OD Intended for use in clinical interventions and for anatomical structures where computed tomography and/or endoscopic bronchoscopy are currently used for visualizing Model: INS-0352
Olympus Corporation of the Americas
Electromagnetic (EM) sensor tracking malfunction impacts the use of navigation functionality during endobronchial procedures and prompts the system to report a coil break warning message. This could result in a potential procedural delay
Gore Tips Set Device, Catalog Number TSET1016, percutaneous liver access
Creganna Medical Devices
Three lots of product may be labeled with an incorrect expiration day
Always-On Tip Tracked Instruments (SPiN Drive instruments) Forceps, 1.8 mm OD, Oval Cup-Intended for use in clinical interventions and for anatomical structures where computed tomography and/or endoscopic brINS-0362onchoscopy are currently used for visualizing Model: INS-0362
Olympus Corporation of the Americas
Electromagnetic (EM) sensor tracking malfunction impacts the use of navigation functionality during endobronchial procedures and prompts the system to report a coil break warning message. This could result in a potential procedural delay
Custom Sterile and Non-Sterile Procedural Kits containing Turkuaz Ultrasound Gel. Labeled as the following: a. C V MINOR PACK, Model Number: DYNJ64862A; b. DBD-C SECTION ADM, Model Number: DYKL1816; c. FETAL SURGERY, Model Number: DYNJ908118A;
MEDLINE INDUSTRIES, LP - Northfield
Potential for the labeled sterile ultrasound gel component within packs to not meet sterility specifications.
Top label on some of the NeuMoDx cartridges within these lots may have been incorrectly applied during the manufacturing process, resulting in encroachment into the PCR region. The misplaced label may interfere with the module s optics performance, thereby increasing the risk for false positive results